RO Membrane NM-SW-8040 Performance:

Permeate Flow:9000 gpd(34m3/d)
Salt Rejection:  99.4%–99.8%

Type:
Configuration: Low Fouling Spiral Wound
Membrane Polymer: PA (polyamide) Thin Film Composite
Membrane Active Area:400 ft2 (37.2 square meter)
Feed Space: 34mil with biostatic Agent

Testing Conditions:
Standard Solution: 32000 ppm NaCl solution
Operating Pressure psi(MPa)    800(5.52)
Recovery Rate of Single Membrane Element: 4%
Temperature deg C:25
PH Value of Solution: 8
Test Time: Run for 30 minutes

Application

* Max. Feedwater Temperature deg C: 45
* Max. Operating Pressure psi(MPa):1200(8.28)
* Max. Feedwater Flow gpm(m3/h):75(17)
* Max. SDI of Feedwater:  5
* Max. NTU of Feedwater: 1
* Concentration of Free Chlorine( ppm)  < 0.1
* PH Value Range of Feedwater as Continuous Operation: 2-11
* PH Value Range of Feedwater as Chemical Cleaning:1-12
* Max. Pressure Difference of Single Membrane Element psi(MPa):15(0.10)
* The minimal proportion of single membrane element’s conc. press to perm.
* Flow: 5:1 Applicable to the water <30000ppm salt. in electronics, power, petrochemical, food, beverage and pharmacy.

RO membrane element is used for the desalination of Seawater and other similar water and it has high desalination rate and long time stable performance under high flow and high operating pressure.

Video of Seawater Desalination RO Membrane

Packaging

Paper carton packaged, Gross Weight around 18kgs/unit.

Our Service

We are the international Leading manufacturer of RO System, we can offer integrating solution according to your client requirement.
According to client requirement offer the RO Membrane 8040 /4040.