UF Membrane Advantages Hello buddies, here are 50 sets 9 inches outside-in ultrafiltration membranes that will be delivered to our Indonesian client. Model No.is NM-UF-2860, the Membrane area of each membrane is 52 square meters, and the designed flux is 3-5 tons per hour. These 50 membranes can process more than 4,000 tons of drinking…
30 m3/ Hour Pure Water EDI System This 30 m3/Hour Pure Water EDI System, will ship to Russia, with a capacity of 30m3/Hour. It has 6 sets of 5m3/hour EDI Modular, the Maximum design flow rate can be 6m3/hour for each EDI Modular. Application: The Feed water with low total dissolved solids (TDS) feed (2…
30m3 per hour EDI System pure water filtration operation Today, we will briefly introduce the EDI Pure Water System, which will ship to Russia, with a capacity of 30m3/Hour. It has 6 sets of 5m3/hour EDI Modular, the Maximum design flow rate can be 6m3/hour for each EDI Modular. This is the Control Panel of…
The Whole Process of Installation MBR Membrane Submerged MBR Membrane for wastewater filtration Assembly video in the factory
The whole process of Assembling an Ultrafiltration Plant The whole process of Assembling an Ultrafiltration Plant With a 10m3/hour Ultrafiltration System, the treatment process is Booster Pump—–Sand / Activated Carbon Filter—–Cartridge Filter—–UF System.
The difference between conventional PVDF Membrane and Reinforced PVDF Membrane-Hinada A: Could we know what’s the difference between conventional PVDF Membrane and Reinforced PVDF Membrane? B: The conventional PVDF Membrane is NIPS Hollow fibers made by pure PVDF non-solvent; And reinforced PVDF Membrane use Knits PET fibers as supporting layer, coating the NIPS PVDF non-solvent…
The difference between NIPS and TIPS of PVDF Material MBR Membrane A: Could we know what’s the difference between NIPS and TIPS of PVDF Material MBR Membrane? B: Firstly, NIPS and TIPS are two types of methods for making the Hollow fibers, NIPS is the abbreviation for non-solvent induced phase separation, and TIPS is…
